PRODUCTS
200kW Automatic Load Bank
Resistive load bank is a device which can simulate the real-life resistive loads and provides a rigorous test regime for power supplies from 1kW to 60MW. The “load” of a resistive load bank is created by the conversion of electrical energy to heat by power resistors. It mainly used to test and maintenance of Engine Generators, Storage Battery Systems, UPS Systems, Inverters, Ground Power Units, Auxiliary Power Units, Aircraft Power Generators, Wind Generators, Hydro Generators etc.
Resistive load bank are available in stationary type for permanent installation or portable type with lifting rings, castors. Larger load banks, typically above 1700KW, are based on an ISO container construction. Special finishes including custom paint colors and stainless steel casings can be supplied.
According to the special requirements, we work out a solution AC415-200KW Automatic Load
Bank (we called system in following paragraphs), including technical standard of function, performance, instruction, structure, installation and testing. System consists of measuring control and load bank. Mainly including Dry Type AC Load Bank, Data Acquisition System, Automatic Load/unload Control System, Cooling Device, Assist-control
Device and PC software (English).
AC415-200kW Automatic Load Bank
| Rating Voltage/Frequency | 415VAC/50Hz, 3 Phase 4 Wire |
| Rated Power | Resistive load: 210kW |
| Load Step | 1、2、2、5、10、20、20、50、100kW, min step load: 1kW |
| Power Factor | 1 |
| Load Tolerance (each step) | ±5% |
| Load Tolerance (overall) | ±3% |
| Display Precision | 0.5 class |
| Control Power | External 240VAC single phase, 50Hz |
| Wire Connection | Load power supply input - Copper bar (star coupling) Control power supply input - Connector-bar |
| Insulation | F |
| Duty Cycle | Continuous |
| Cooling | Forced air cooling |
| Transportation | Hoisting, with lifting lug on top and castors at the bottom of casing |
| Casing Color | Grey（RAL7035）or as you required |
| Equipment Dimension | About 1450mm*900mm*900mm(L*W*H) |
| Weight | About 350kgs |
Operating Environment Parameter
| Workplace | Indoor |
| Ambient Temperature | -20℃～+50℃ |
| Relative Humidity | ≤95% |
| Altitude | ≤2500 meter |
| Atmospheric Pressure | 86～106kPa |
Brands of Main Components
| Contactor | Schneider | |
| Fuse | Miro | |
| PLC | Siemens | |
| Data Processing Software | Top Rail Services (self-developed) | |
| Alloy Resistance | Top Rail Services (self-developed) |