PRODUCTS
600kW Automatic Load Bank
Resistive load bank is a device which can simulate the real-life resistive loads and provides a rigorous test regime for power supplies from 1kW to 60MW. The “load” of a resistive load bank is created by the conversion of electrical energy to heat by power resistors. It mainly used to test and maintenance of Engine Generators, Storage Battery Systems, UPS Systems, Inverters, Ground Power Units, Auxiliary Power Units, Aircraft Power Generators, Wind Generators, Hydro Generators etc.
Resistive load bank are available in stationary type for permanent installation or portable type with lifting rings, castors. Larger load banks, typically above 1700KW, are based on an ISO container construction. Special finishes including custom paint colors and stainless steel casings can be supplied.
Description
AC415-600kW Automatic Load Bank
Rating Voltage/Frequency | 415VAC/50Hz, 3 Phase 4 Wire |
Rated Power | Resistive load: 610kW |
Load Step | 1kW,2kW,2kW,5kW,10kW,20kW,20kW,50kW,100kW,200kW,200kW |
Power Factor | 1 |
Load Tolerance (each step) | ±5% |
Load Tolerance (overall) | ±3% |
Display Precision | 0.5 class |
Control Power | External 380VAC/50Hz, 3 phase 4 wire |
Wire Connection | Load power supply input - Copper bar (star coupling) Control power supply input - Connector-bar |
Insulation | F |
Duty Cycle | Continuous |
Cooling | Force air cooling, horizontal air inlet and vertical air outlet |
Transportation | Hoisting, there are lifting lug on top and castors at the bottom of casing |
Casing Color | Grey(RAL7035)or as you required |
Equipment Dimension | 1650*1350*1680mm(L×W×H) |
Weight | About 800kgs |
Operating Environment Parameter
Workplace | Indoor |
Ambient Temperature | -20℃~+50℃ |
Relative Humidity | ≤95% |
Altitude | ≤2500 meter |
Atmospheric Pressure | 86~106kPa |
Brands of Main Components
Contactor | Schneider | |
Fuse | Miro | |
PLC | Siemens | |
Data Processing Software | Top Rail Services (self-developed) | |
Alloy Resistance | Top Rail Services (self-developed) |